SIG150-4 5.25” Signature Series Woofer 60W Driver 4 Ohm

Quick Overview

The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. After hours of painstaking engineering and testing with meticulous attention to detail, we at Dayton Audio deem this driver line worthy of the endorsement of even the most critical audiophile.

Product Highlights

  • Extensive Klippel LMP and LSI testing to optimize Bl symmetry and parameters
  • Indexed cone/surround junction for smooth transition/frequency response
  • Polyimide formers for improved mechanical damping smooth frequency response
  • One piece concave black anodized aluminum cone
  • Vented former and elevated spider for improved air flow
  • Open aluminum cast frame for improved heat dissipation
  • Countersunk stainless steel magnet badging for long time aesthetics

Product Manuals / Spec Sheets / Downloads

Dayton Audio SIG150-4 Specification Sheet
Dayton Audio SIG150-4 Graphs/FRD/ZMA Data File

Buying Options

Dayton Audio SIG150-4 5.25” Signature Series Extended Range 60W Driver 4 Ohm

The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion.


Key Specs:

  • Nominal Diameter: 5-1/4"
  • Power Handling (RMS): 60 watts
  • Power Handling (MAX): 120 watts
  • Impedance:
  • Frequency Response: 60 - 4,000 Hz
  • Sensitivity: 91.1 dB @ 2.83V/1m
  • Voice Coil Diameter: 26.7mm
  • Maximum Linear Excursion: 4mm

Signature Sound and Performance

The smooth and extended frequency response of these Dayton Audio speaker drivers ensures that the entire audible spectrum is accurately reproduced, from the lowest bass notes to the highest treble frequencies. This well-balanced frequency response delivers a natural and immersive listening experience, allowing you to hear every detail and nuance in your favorite music or movies.


Meticulous Attention to Detail

The speaker drivers' design, materials, and meticulous engineering work in harmony to minimize distortion, ensuring that the sound remains clean and clear even at high volumes. By achieving low distortion, these speaker drivers provide an accurate representation of the original audio signal, allowing audiophiles to enjoy a true-to-life listening experience with exceptional clarity and precision. The Signature Series speaker drivers used rigorous Klippel testing throughout the design process, a state-of-the-art analysis method to provide optimal performance, consistency, and reliability by precisely measuring and optimizing the drivers' magnetic and mechanical properties.

Indexed Cone and Surround Junction

Diffraction caused by the abrupt edge of the surround is minimized by the use of an indexed junction. This design feature helps create a smooth transition between the cone and surround, resulting in improved frequency response while improving the rigidity of the cone further resulting in less cone distortion at high excursion.


Vented Polyimide Former with CCA Voice Coil Wire and Elevated Spider Suspension

The polyimide voice coil formers provide excellent mechanical damping and a smoother frequency response, and the copper-clad aluminum (CCA) wire reduces moving mass further enhancing the overall sound quality and increasing the efficiency of the speaker driver. An elevated spider and vented former increases airflow to the coils to keep the assembly running cool during long periods of use.


Concave Black Anodized Aluminum Cone

The aluminum construction of the cone is lightweight, rigid, and helps reduce distortion, contributing to a more accurate sound reproduction. The anodization process is optimized to contribute to the dampening of the cone and provides high aesthetic value to any speaker design.

Open Aluminum Cast Frame and Stainless-Steel Badging

The aluminum cast frame keeps movement isolated to the diaphragm, increasing low frequency performance and providing additional thermal dissipation. Stainless-steel badging completes the sleek aesthetic of the Signature Series drivers providing a timeless visual appeal for every speaker designer.

Speaker Series Signature Series
Model Number SIG150-4
Color Black
Unit of Measure Each
UPC 848791009068
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 2.64
Speaker Type Woofer
Power Handling (RMS) 60 watts
Power Handling (max) 120 watts
Continuous Program Power --
Impedance 4 ohms
Sensitivity 91.1 dB @ 2.83V/1m
Frequency Response 60 - 4,000 Hz
Voice Coil Diameter 26.7 mm
Magnet Weight --
DC Resistance (Re) 3.7 ohms
Voice Coil Inductance (Le) 0.35 mH
Resonant Frequency (Fs) 61.5 Hz
Mechanical Q (Qms) 5.78
Electromagnetic Q (Qes) 0.53
Total Q (Qts) 0.49
Diaphragm Mass Inc. Airload (Mms) 10.2g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.66 mm/N
Surface Area Of Cone (Sd) 96 cm²
Volume of Displacement (Vd) 58 cm³
BL Product (BL) 5.2 Tm
Compliance Equivalent Volume (Vas) 8.7 liters
Maximum Linear Excursion (Xmax) 4 mm
Drivers Mechanical Losses (Rms) --
Cone / Diaphragm Material Aluminum Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material Copper
Voice Coil Former Glass fiber
Basket/Frame Material Cast aluminum
Magnet Material Ferrite
Overall Outside Diameter 151.9 mm
Overall Depth 67 mm
Baffle Cutout Diameter 120 mm
# Mounting Holes 6
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight --
Loading...