Your shopping cart is currently empty.
DS115-8 4" Designer Series Woofer Speaker 8 Ohm
Quick Overview
More than just a pretty speaker, the Dayton Audio Designer Series DS115-8 4" woofer features an extremely neutral response and high Xmax capability.Product Highlights
- Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet
- Coated paper cone, half roll rubber surround for durability and accurate reproduction
- Cosmetic frame with low profile lip, designed for front mounting—no countersinking required!
- Vented pole piece for minimized power compression and maximized reliability
- Generous Xmax capability encourages use of moderate bass boost to tailor the response
- Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators
- Smooth frequency response and linear roll-off simplify filter design, assuring good results with off-the-shelf crossovers
Product Manuals / Spec Sheets / Downloads
Dayton Audio DS115-8 Specification SheetDayton Audio DS115-8 Data Files
Buying Options
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.
These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.
OPTIMUM CABINET SIZE *
Sealed Volume 0.04 ft.³
Sealed F3 124 Hz
Vented Volume 0.09 ft.³
Vented F3 70 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations
| Speaker Series | Designer Series |
| Model Number | DS115-8 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 844632095382 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 1.85 |
| Speaker Type | Woofer |
| Nominal Diameter | 4" |
| Power Handling (RMS) | 35 watts |
| Power Handling (max) | 70 watts |
| Continuous Program Power | -- |
| Impedance | 8 ohms |
| Sensitivity | 85.3 dB @ 2.83V/1m |
| Frequency Response | 60 - 8,000 Hz |
| Voice Coil Diameter | 25.4 mm |
| Magnet Weight | 11 oz. |
| DC Resistance (Re) | 5.8 ohms |
| Voice Coil Inductance (Le) | 0.8 mH @ 1 kHz |
| Resonant Frequency (Fs) | 55.2 Hz |
| Mechanical Q (Qms) | 2.1 |
| Electromagnetic Q (Qes) | 0.46 |
| Total Q (Qts) | 0.38 |
| Diaphragm Mass Inc. Airload (Mms) | 7.9g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 1.05 mm/N |
| Surface Area Of Cone (Sd) | 54.1 cm² |
| Volume of Displacement (Vd) | 22.2 cm³ |
| BL Product (BL) | 5.88 Tm |
| Compliance Equivalent Volume (Vas) | 4.33 liters |
| Maximum Linear Excursion (Xmax) | 4.1 mm |
| Drivers Mechanical Losses (Rms) | -- |
| Cone / Diaphragm Material | Coated Paper |
| Entry / Exit Diameter | -- |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket/Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 115.6 mm |
| Overall Depth | 54.7 mm |
| Baffle Cutout Diameter | 93.6 mm |
| # Mounting Holes | 4 |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |