Your shopping cart is currently empty.
RSS210HO-8 8" Reference HO Subwoofer 8 Ohm
Quick Overview
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.Product Highlights
- Extensively vented motor eliminates power compression and allows quiet excursion
- Triple shorting-ring motor for ultra-low distortion
- Heavy-gauge aluminum cones withstand pressures of small enclosures
- 4-layer high-temperature coils for maximum power handling
- Durable aramid fiber spider for greater mechanical control
- Unique, high-end look
- Optimized for small enclosures
Product Manuals / Spec Sheets / Downloads
Dayton Audio RSS210HO-8 Specification SheetDayton Audio RSS210HO-8 Data Files
Buying Options
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
OPTIMUM CABINET SIZE *
Sealed Volume 0.28 ft.³
Sealed F3 58 Hz
Vented Volume 0.7 ft.³
Vented F3 32 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations
| Speaker Series | Reference Series |
| Model Number | RSS210HO-8 |
| Color | Black |
| Unit of Measure | Each |
| UPC | 848791000348 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 11.7 |
| Speaker Type | Subwoofer |
| Nominal Diameter | 8" |
| Power Handling (RMS) | 300 watts |
| Power Handling (max) | 500 watts |
| Continuous Program Power | -- |
| Impedance | 8 ohms |
| Sensitivity | 83.5 dB @ 2.83V/1m |
| Frequency Response | 30 - 1,500 Hz |
| Voice Coil Diameter | 50 mm |
| Magnet Weight | -- |
| DC Resistance (Re) | 5.9 ohms |
| Voice Coil Inductance (Le) | 1.46 mH @ 1 kHz |
| Resonant Frequency (Fs) | 29.6 Hz |
| Mechanical Q (Qms) | 2.78 |
| Electromagnetic Q (Qes) | 0.45 |
| Total Q (Qts) | 0.39 |
| Diaphragm Mass Inc. Airload (Mms) | 99.3g |
| Moving Mass Of Diaphragm (Mmd) | -- |
| Mechanical Compliance of Suspension (Cms) | 0.29 mm/N |
| Surface Area Of Cone (Sd) | -- |
| Volume of Displacement (Vd) | 256.6 cm³ |
| BL Product (BL) | 15.6 Tm |
| Compliance Equivalent Volume (Vas) | 18.7 liters |
| Maximum Linear Excursion (Xmax) | 12 mm |
| Drivers Mechanical Losses (Rms) | -- |
| Cone / Diaphragm Material | Aluminum Cone |
| Entry / Exit Diameter | -- |
| Surround Material | Rubber |
| Voice Coil Wire Material | -- |
| Voice Coil Former | -- |
| Basket/Frame Material | Cast Aluminmun |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 213 mm |
| Overall Depth | 126 mm |
| Baffle Cutout Diameter | 185 mm |
| # Mounting Holes | 6 |
| Mounting Hole Diameter | -- |
| Bolt Circle Diameter | -- |
| Product Weight | -- |