RSS315HE-22 12" Reference Series High Excursion Subwoofer 2+2 ohm

Quick Overview

Dayton Audio’s RSS315HE-22 12" Reference Series high excursion dual voice coil subwoofer sets a new standard for controlled bass response from small enclosures. With a rigid aluminum cone, large copper shorting ring, and thick aluminum sleeve the RSS315HE-22 delivers ultra-low distortion. A 3” voice coil, massive motor assembly, and 25 mm Xmax gives it the capability to produce remarkable output levels. This massive 12” is perfect for anyone looking for maximum low frequency response, earth shaking impact, and incredibly clean output.

Product Highlights

  • Designed for maximum excursion and extended low frequency response
  • Copper ring and thick aluminum sleeve minimize inductance to deliver ultra-low distortion
  • Large 3” diameter voice coil is wound on a spiral cut aluminum former allowing high power handling
  • Thick aluminum cone and dustcap improves heat dissipation to keep power compression under control
  • Optimized venting for maximum airflow across the voice coil with extremely quiet operation
  • Dual spiders and high roll surround reduce rocking modes during high displacement
  • Dual 2 ohm voice coils give you the ability to get maximum power out of most amplifiers

Product Manuals / Spec Sheets / Downloads

Dayton Audio RSS315HE-22 Specifications
Dayton Audio RSS315HE-22 Graphs/FRD/ZMA Data File

Buying Options

The RSS315HE-22 12" Reference Series high excursion subwoofer from Dayton Audio will generate incredible bass response with unparalleled detail, control, and SPL capability. Engineered for maximum linear displacement with extensive inductance control, this massive subwoofer produces unmatched low frequency extension and high output with the lowest possible distortion. Optimized for small enclosures and with dual 2-ohm voice coils, the RSS315HE-22 is flexible enough to add breath taking bass to high output home and car audio designs.

Remarkably powerful low distortion motor

In order to keep precise control of the cone when driven to high excursion, the RSS315HE-22 requires an incredibly powerful motor. A stack of 3 high energy Y-35 ferrite magnets is used to provide the force needed while allowing ample clearance for the voice coil to travel without impacting the back plate. A copper ring and thick aluminum sleeve helps minimize stored energy and lower inductance as the coil travels through the motor. This massive motor assembly gives the RSS315HE-22 the ability to produce extremely low distortion and accurate response even when driven to the limits of its 50 mm peak-to-peak excursion.

Amazing power handling with low power compression

Driving the cone is a large 3” diameter voice coil wound on a thick aluminum former that is capable of dissipating enough heat to handle up to 800 watts RMS. A spiral spit in the former minimizes the eddy currents that are induced into any conductive former, to further lower inductance and distortion. The venting through the voice coil former and pole piece delivers ample airflow across the coil while minimizing turbulence to allow quiet operation when pushed to high displacement. In addition, the copper ring and aluminum sleeve improve heat transfer to the pole piece and magnet assembly, more efficiently absorbing heat away from the coil. All of this gives the RSS315HE-22 the ability to reliably handle tons of power without suffering from significant power compression, even when pushed hard for extended periods.

Optimized suspension for maximum linear stroke

In order to accommodate the 25 mm Xmax, the RSS315HE-22 required flexible suspension that permits linear movement to keep the voice coil centered even when driven beyond the limits of excursion. A custom tooled high roll surround maintains surface area and allows an incredible amount of travel without tightening up or distorting. Dual progressive spiders with integrated tinsel leads support the cone and voice coil. The spiders are optimized to begin restricting movement just as the driver reaches Xmax to protect from catastrophic damage in the event of excessive dynamic peaks. In addition, the spiders have significant space between them to keep the coil centered in the tight magnetic gap. Every aspect of the suspension on the RSS315HE-22 has been designed to reliably deliver extreme excursion capability without adding significant distortion.

Aluminum cone and dustcap… a Reference series tradition

To visually fit in with the rest of the popular Reference Series Subwoofers, the RSS315HE-22 uses a rigid anodized aluminum cone and dustcap. The cone is significantly thicker to withstand the force that will be applied with such a powerful motor and to increase mass for a low Fs. Thanks to the rigidity and natural damping properties of aluminum, any cone breakup is pushed well outside of the pass band giving the RSS315HE-22 exceptionally flat response, even throughout the mid-bass and lower midrange frequencies. In addition, aluminum is an excellent conductor of heat, turning the entire cone and dustcap assembly into a large heatsink that effectively wicks heat away from the voice coil to further control power compression.

Incredible flexibility to add powerful bass to any system

The specs of the RSS315HE-22 have been balanced to operate in a variety of situations. Extended low frequency extension makes it ideal for subwoofer use in home audio and theater systems. With extremely small enclosure requirements, the RSS315HE-22 is also an excellent choice for use in high output car audio designs. Also, dual 2-ohm voice coils allow for stereo 2-ohm or mono 1-ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a more common 4-ohm load for greater amplifier compatibility. All of the Reference Series HE drivers are built to provide amazing low frequency response with unbelievable power, impact, and detail.

Note: All specifications measured with the voice coils wired in series.

OPTIMUM CABINET SIZE *

Sealed Volume 1 ft.³
Sealed F3 55 Hz
Vented Volume 1.5 ft.³
Vented F3 29 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations

Speaker Series Reference Series
Model Number RSS315HE-22
Color Black
Unit of Measure Each
UPC 848864058351
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Product Shipping Weight (lbs.) 32.95
Speaker Type Subwoofer
Nominal Diameter 12"
Power Handling (RMS) 800 watts
Power Handling (max) 1600 watts
Continuous Program Power --
Impedance 2+2 ohms
Sensitivity 88.1 dB @ 2.83V/1m
Frequency Response 25 - 750 Hz
Voice Coil Diameter 3.01"
Magnet Weight --
DC Resistance (Re) 4.1 ohms
Voice Coil Inductance (Le) 2.2 mH @ 1 kHz
Resonant Frequency (Fs) 32 Hz
Mechanical Q (Qms) 4.8
Electromagnetic Q (Qes) 0.51
Total Q (Qts) 0.46
Diaphragm Mass Inc. Airload (Mms) 263g
Moving Mass Of Diaphragm (Mmd) --
Mechanical Compliance of Suspension (Cms) 0.09 mm/N
Surface Area Of Cone (Sd) 499 cm²
Volume of Displacement (Vd) -- cm³
BL Product (BL) 20.9 Tm
Compliance Equivalent Volume (Vas) 32.4 liters
Maximum Linear Excursion (Xmax) 25 mm
Drivers Mechanical Losses (Rms) --
Cone / Diaphragm Material Aluminum Cone
Entry / Exit Diameter --
Surround Material Rubber
Voice Coil Wire Material CCA
Voice Coil Former Aluminum
Basket/Frame Material Cast Aluminum
Magnet Material Ferrite
Overall Outside Diameter 12.32"
Overall Depth 7.2"
Baffle Cutout Diameter 10.32"
# Mounting Holes 8
Mounting Hole Diameter --
Bolt Circle Diameter --
Product Weight 32.95 lbs.
Loading...