Your shopping cart is currently empty.
SPA100-D 100 Watt Class-D Subwoofer Plate Amplifier
Quick Overview
The Dayton Audio SPA100-D high-efficiency subwoofer plate amp packs big-amp features into a compact chassis that is ideal for installation into cabinets that can't accommodate bulky old-style amps.Product Highlights
- 100W RMS Output @ 4 ohms
- Switchable 6 dB @ 30 Hz bass boost
- Class-D output stage for highly efficient, well defined output
- Manual and Auto on/off modes for compatibility with any automated system
- Variable gain, crossover point and switchable phase controls optimize room integration
- Switchable 120/240V input voltage
Product Manuals / Spec Sheets / Downloads
Dayton Audio SPA100-D User ManualBuying Options
Dayton Audio SPA100-D 100 Watt Class-D Subwoofer Plate Amplifier
The plate amplifier that packs a punch!
The Dayton Audio SPA100-D high-efficiency subwoofer plate amp packs big-amp features into a compact chassis that is ideal for installation into cabinets that can't accommodate bulky old-style amps. A Class-D topology makes it small, but with the same output capability as a traditional amplifier topology. We've included everything that you need to connect the amp to your system and get maximum performance!
Key Specs:
- Channels: 1
- Power Handling @ 4 ohms (RMS): 100 Watts
- Power Handling @ 4 ohms (MAX): 200 Watts
- Frequency Response: 20Hz - 200Hz
- Inputs: 2x RCA Inputs
- Outputs: 1x Powered Output
Phase Switch
Correct misalignment between your speakers and your subwoofer with a phase inversion switch
Variable Crossover
Maintain a smooth transition from your full-range speakers with a variable low-pass filter.
Bass Boost
Get maximum performance from smaller drivers and enclosures with a switchable 6dB boost at 30Hz.
Auto-On
When no signal is present, the SPA100-D will shut itself off until you need it most!
Class-D Excellence
The efficient class-D design keeps size and weight to a minimum while providing maximum power to your driver. SPA-D Amplifiers are perfect for subwoofer duty due to their high efficiency and low noise volume at lower frequencies making amplification selection easier than ever.
Connectivity
Front:
1. Power Input - This unit features an IEC Type power jack
2. Low-Level Inputs (Left/Right) - RCA Style jacks that will accept standard line level inputs from a pre-amp level source.
3. Output Lead for Subwoofer Driver - This rear mounted output lead connects the amplifier to the subwoofer driver
4. Power/Clipping LED - This LED indicator will display the current status of the amplifier.
5. Volume (Gain) - This control will match the amplifier's input sensitivity to the output of the pre-amp source.
6. Frequency (Low-pass crossover) - This sets the highest frequency the subwoofer will reproduce and has a range between 40-200Hz with a slope of 18dB/Oct.
7. Phase - This two-position switch helps to compensate for differences between the acoustical and electrical characteristics between the subwoofer and main speakers.
8. Auto Turn On/Off - When the "auto" position is selected the amp is in standby mode until an input signal is detected.
9. Bass Boost - This allows the user to add a 6dB boost to the response centered at 30Hz.
10. Main Power Switch - Main power disconnect.
Specifications:
- Channels: 1
- Power Handling (RMS): 100 Watts
- Power Handling (MAX): 200 Watts
- Frequency Response: 20 - 200Hz
- Input Sensitivity: 180 mV
- SNR, A-Weighted: 90 dB
- Total Harmonic Distortion: <1%
- Inputs: 1
- Power Requirements: 115 - 230 VAC
- Power Consumption: 100 Watts
- Dimensions: 8-1/16" H x 7-1/16" W x 2-1/8" D
- Weight: 1.6 lbs.