Your shopping cart is currently empty.
APA102BT Class D Stereo 60 WPC Bluetooth Amplifier
Quick Overview
Connect with the Dayton Audio APA102BT amplifier and enjoy the convenience of Bluetooth, auto-on, and auto-source switching technology that makes playing your favorite music a breeze. Use this affordable, versatile amp when more power is needed in a multi-zone system, or in a powerful, audiophile-grade stereo hi-fi setup.Product Highlights
- Bluetooth 4.2 with aptX technology for wireless Hi-Fi listening
- Dual stereo RCA line level inputs switch sources automatically
- Convenient signal sensing power on and trigger modes save power when not in use
- A/B speaker selector simplifies connectivity
- 5-way binding posts on both sets of L/R speaker outputs
Product Manuals / Spec Sheets / Downloads
Dayton Audio APA102BT User ManualBuying Options
The Dayton Audio APA102BT high fidelity power amplifier switches sources and powers on (in auto-on mode) automatically when a source signal is detected. Bluetooth 4.2 with aptX, two line input sources, two-channels, and Class D topology make Dayton Audios APA102BT amplifier the heavyweight in its class. The APA102BT features two pairs of RCA line level inputs and a loop-out from the second source to feed additional zones, receivers, or other devices. Use the APA102BT for additional power when connected to a multi-zone audio system, or by itself to power a stereo speaker system.
The APA102BT is rated at 80 watts RMS per channel into 4 ohms, and 60 watts RMS per channel into 8 ohms. In bridged mono mode, both amplifier channels are combined for high-power monaural output. The amplifier is rated at 160 watts RMS into a single 8 ohm load when bridged. Each amplifier output channel incorporates robust protection circuitry for reliability and safety. Rack ears are included.
Specifications: • Output power: 2 x 60 watts RMS into 8 ohms, 2 x 80 watts RMS into 4 ohms, 1 x 160 watts RMS into 8 ohms (minimum impedance) bridged mono • Bluetooth version: 4.2 with aptX • Total harmonic distortion: <1.0% @ 1 kHz • Signal to noise ratio: 88 dB, A-weighted • Frequency response: 10-30,000 Hz • Input sensitivity: 600 mV • Power: 120 VAC, 60 Hz, 200 watt maximum • Amplifier chip: TDA8950TH • Dimensions: 16.9" W x 7.65" D x 2.15" H.
| Model Number | APA102BT |
| Color | Black |
| Unit of Measure | Each |
| UPC | 848864056234 |
| Warranty - Parts | 5 Years |
| Warranty - Labor | 5 Years |
| Product Shipping Weight (lbs.) | 6.2 |
| Product Height | 2.15" |
| Product Width | 16.9" |
| Product Length | -- |
| Product Depth | 7.65" |
| Amplifier Type | Power Amplifiers |
| Power Output | 2 x 60 watts RMS into 8 ohms 80 watts RMS into 4 ohms |
| Power Output (RMS @ 70V) Range | -- |
| Output Channels | 2 |
| Output Connectors | 277477 |
| Output Types | 285286 |
| Inputs | 2 |
| Input Connectors | 299 |
| Input Impedance | -- |
| Signal-to-Noise Ratio | 88 dB A-weighted |
| THD @ Rated Power | <1.0% @ 1 kHz |
| Parametric EQ | -- |
| Phase Adjustment | -- |
| Low-pass Crossover | -- |
| Low Pass Adjustment | -- |
| Dynamic Range | -- |
| Frequency Response | 10-30 000 Hz |
| Efficiency | -- |
| Gain | -- |
| Bass Boost | -- |
| Voltage Requirement | 120 VAC 60 Hz |
| Auto-on Sensitivity | Yes |
| Stand-by Power Rating | -- |
| Special Features | Bluetooth version: 4.2 with aptX |