CE38M-8 1-1/2" Mini Speaker Driver 8 Ohm

MSRP: $4.99

Quick Overview

Dayton Audio’s CE38M-8 is a lightweight and versatile mylar-diaphragm mini speaker with a rugged plastic frame and neodymium magnet. It’s a great choice for new design or replacement use in headphones, kiosks, electronic games, or portable electronics.

Product Highlights

  • Lightweight mylar diaphragm
  • Rugged molded plastic frame
  • Powerful neodymium magnet
  • Light weight, low cost

Product Manuals / Spec Sheets / Downloads

Dayton Audio CE38M-8 Specification Sheet

Buying Options

The Commercial Engineering (CE) series of speaker drivers from Dayton Audio provides engineers, designers, and integrators with a line of economical small drivers that fit the diverse range of applications found in consumer electronics and audio-enabled electronic projects.

The Dayton Audio CE38M-8 1-1/2” mini speaker features a feather-light and smooth-sounding Mylar diaphragm and a lightweight injection-molded plastic frame, making it great for portable electronics and headphones. The high sensitivity also enables it to be used as a speaker in kiosks, intercoms, displays, or electronic games, and the 8-ohm impedance works with most small audio amplifiers or line-level outputs. The round frame can be press-fit or glued in place.

Note: The Mylar diaphragm is very fragile. To prevent damage, avoid contact with the diaphragm when handling. This driver should be installed behind a grille.

Speaker Series CE Series
Model Number CE38M-8
Unit of Measure Each
UPC 848791001093
Warranty - Parts 5 Years
Warranty - Labor 5 Years
Weight 0.02 lbs.
Speaker Type Mini Speaker
Nominal Diameter 1.50"
Power Handling (RMS) 0.25 watts
Power Handling (max) 0.50 watts
Impedance 8 ohms
Sensitivity 75 dB @ 1W/1m
Frequency Response 190 - 20,000 Hz
Voice Coil Diameter 12.5 mm
DC Resistance (Re) 7.72 ohms
Voice Coil Inductance (Le) 0.172 mH
Resonant Frequency (Fs) 191.8 Hz
Mechanical Q (Qms) 1.59
Electromagnetic Q (Qes) 4.45
Total Q (Qts) 1.17
Diaphragm Mass Inc. Airload (Mms) 0.07g
Mechanical Compliance of Suspension (Cms) 9.68 mm/N
Surface Area Of Cone (Sd) 4.91 cm²
Volume of Displacement (Vd) 0.05 cm³
BL Product (BL) 0.39 Tm
Compliance Equivalent Volume (Vas) 0.33 liters
Maximum Linear Excursion (Xmax) 0.1 mm
Voice Coil Former Mylar
Magnet Material Neodymium
Overall Outside Diameter 42 mm
Overall Depth 7.6 mm
Loading...